Skip nav to main content.

Metal Fabrication

GEKA BENDICROP SERIES HYDRAULIC IRONWORKERS

CONTACT US

MODEL BENDICROP 85

DOWNLOAD BENDICROP 85 BROCHURE

Metal fabricators and construction companies often have to perform simple bending operations. GEKA has developed the BENDICROP 85 SD model which, in addition to the cutting, punching and notching stations, holds a permanently fitted bending station with a capacity of up to 8 x 5/8″ Geka’s exclusive Bendicrop 85 SD is a dual cylinder machine with 5 working stations:

Punching station. More powerful, 20″ extended throat (SD version)
    Flat bars shearing
    Bending station
    Triangular notching station
    Round and square bars shearing station
    Automatic length stop

Furthermore, it is fitted with a system to reduce deformation when shearing flat bars.
There are two different versions of this model: S (12″ throat) and SD (20″ throat).

Bendicrop 85 SD comes with standard hydraulic hold down system for angles profiles and flat bar cutting stations:
It’s an hydraulic special device, and it has a spring-loaded support system on the plate shearing station to achieve a non-distorted cut.

 

MODEL BENDICROP 60

Two cylinders ironworker with five work stations exclusive from GEKA.
There are two different versions of this model: S (10″ throat) and SD (20″ throat).

Permanent bending station complying with CE safety standards.

Thanks to the blade holder’s vertical movement, machine has an excellent performance in all its five work stations:

Punching
    Notching
    Shear for flat bars
    Angle cutting
    Cutting of round and square bars

Fitted with an anti torque system to minimize deformation when shearing flat bars.

The BENDICROP model is fitted with a touch and cut length stop and is delivered with two V-shaped bending dies of 1 – 9/16″ and 2 – 3/4″.

Permanent bending station complying with CE standards.
Goose neck die-holder for punching of D and E sections on legs and webs. . Quick tool change
Angle shearing without loss of material. Wide range of openings for B and A .
Flat bar and plate shearing system with minimum deformation F miter shearing up to 45º.
Rectangular notching with table Also suitable for tube notching, rectangular notching, etc
Anti torque system for flat bar shearing without deformation.


CAPACITIES:

BENDICROP 85

  • 90 Ton punch with a punching capacity of 1-1/2″ x 5/8″ or 1″ x 7/8″
  • 18″ x 5/8″ or 12″ x 3/4″ flat bar shearing
  • 5″ x 5″ x 1/2″ angle shearing at 90°
  • 8″ x 5/8″ bending capacity
  • 3-1/2″ x 3-1/2″ x 9/16″ notching capacity

BENDICROP 60

  • 65 Ton punch with a punching capacity of 1-1/2″ x 5/8″ or 1″ x 7/8″
  • 14″ x 3/8″ (5º) 14″ x 1/2″ flat bar shearing
  • 5″ x 5″ x 3/8″ angle shearing at 90°
  • 6″ x 3/8″ bending capacity
  • 4″ x 3/8″ tringular notching capacity

OPTIONAL EQUIPMENT

  • Rectangular notcher
  • Pipe notcher
  • Oversize punching attachment
  • Factory installed
  • Semi-paxy system and more

NEED TO SELL YOUR EQUIPMENT? WE CAN HELP!

SCHEDULE A FREE CONSULTATION TODAY