Sharp CNC Precision Lathe
CNC Precision Lathe: Model 2040NC, 2060NC, 2080NC
CNC flat bed lathe with FAGOR 8055iA TC control with conversational programming’ 3.38” spindle bore, D1-8 camlock spindle built on one piece casting bed
- Flat bed CNC Teaching Lathe with FAGOR 8055iA control and drive system
- User friendly conversational programming language
- Different modes of operations available
- Operate as manual lathe with electronic handwheels
- Operate as a full CNC lathe with programmable speed,
- using conversational language or G code language
- Operate semi automatically, combining manual and CNC operations
- Teach mode
- OEM 2-axis CNC, 12.1” TFT CNC Chassis & Floppy driver. Std 20 inputs/12 outputs
- D1-8 camlock spindle, 3-3/8” spindle bore
- Geared head with 3 steps speed change, programmable speed
- One Piece Cast Meehanite Bed
- 10 HP Spindle Motor (For 22” TC Model)
CNC CONTROL 8055i/A by Fagor:
OPERATING MODES:
- Manual – the lathe is operated like a conversational lathe, using the 2 electronic handwheels in the front to move the axes. In addition if offers convenient features such as digital readout and constant surface speed.
- Semiautomatic – it allows 2 axes to be controlled with the cranking of 1 handwhel, the machinist can cut arcs, tapers and chamfers.
- Automatic – with ability to execute any program, plus background editing capability. Powerful tool inspection mode included as well as full program control from keyboard programs to choose from, the 8085i/A will control everything from start to finish.
- Single step – the machinist can go through all or part of the process by executing the program step by step.
PROGRAMMING LANGUAGE:
- Conversational – icon key with conversational graphic screens for easy operator data input. No prior programming experience needed
- G-code – this programming enables utilization of some sophisticated features such as parametric or variable programming. Auto –prompt via the help key prompts operator though graphic & text help screens.
PROGRAMMING TOOLS:
- Teach-in mode – the first part can be made manually while the control records the corresponding program, and then additional parts can be made in automatic mode.
- Canned Cycles – by selecting the associated ICON key or G-code, the CNC will prompt you through all canned cycles including Turning, Facing, Grooving and Threading, All equipped with a Thread Repair Canned Cycle.
- On-board profile editor for easy blue print programming. Simply enter the data right off the blueprint, the CNC automatically creates the program including complex profiles..
- Solid graphic as standard with tool shape representation standard and available for use in both Execution and Simulation mode, Also with line graphic capability.
STANDARD EQUIPMENT:
- Back Plate
- Coolant Pump Equipment
- Automatic Lubrication System
- Timing Belts
- Safety Guard (include: Rear Splash Guard,
- 2-Sliding Doors in Front)
- Electrical Box to Suit CNC Turning Control
- Safety Chuck Guard
- Mounting Block for Toolpost
- Halogen Work Lamp
- Encoder for Spindle RPM
- Electronic Handwheel X & Y Axis
- Main Motor 10HP 3Phase Cont. Rating Induction
- Electrical 4-way toolpost
- Toolbox and Adjusting Tools
- Center Sleeve MT#5
- Two Dead Centers
- Camlock Spindle Wrench
- Screw Driver
- Spanner (Double-Ended Wrench)
- Hexagonal Wrench
- Operation Manual
OPTIONAL ACCESSORIES:
- D1-8 Camlock:
- Face Plate 17”
- Face Plate 20”
- 3-jaw chuck 10”, direct mount
- 3-Jaw chuck 12” direct mount
- 4-jaw chuck 12” direct mount
- 4-jaw chuck 16” direct mount
- 3-jaw chuck 12” (BISON)
- 3-jaw chuck 16” (BISON)
- 4-jaw chuck 12” (BISON)
- 4-jaw chuck 16” (BISON)
- Steady Rest for 17” Lathe (3/16” – 4 1/2”)
- Steady Rest for 20 and 22” ( ¼” – 7 1/8”)
- Follow Rest (3/8” – 3”)
- Quick change toolpost 4 tool holders, manual version
- Electrical 4 way toolpost
- Electrical turret tool 8 tools magazine, 1”
- Hydraulic Turret Tool 8 Tools magazine with hydraulic pump and tank
- Hydraulic tailstock with hydraulic pump & tank
- Hydraulic system 3 jaw 10” chuck with draw bar and hydraulic pump & tank .00
- Hydraulic system 3 jaw 10” chuck with draw bar and hydraulic turret tool 8 tools pump & tank with magazine hydraulic pump & tank
- Hydraulic system 3 jaw 10” chuck with draw bar and hydraulic turret tool 8 tools and hydraulic tailstock with magazine hydraulic pump & tank
- CE standard equipment with filter, safety module, interlock and IEC electricity
Specifications available upon request.