Sunrise Ironworker Single Cylinder
IW-50A
The IW-50A features a vertical moving ram at the punching station which improves the punching result and enables use of optional tooling such as pipe notching and press braking tool. The square/round bar shear is a stand-alone station with the possibility of optional channel shear and section bar shear tooling. This model also features lower angle shearing and bar shearing stations.
| Model | IW-45M | IW-50A | IW-60H |
| Punching | |||
| Punching Pressure | 45 Ton | 50 Ton | 60 Ton |
| Punch Capacity | ø22 x 15 | ø20 x 18 | ø28 x 15 |
| (Diameter x Thickness) | ø40 x 8 | ø40 x 9 | ø40 x 11 |
| Throat Depth | 175 | 180 | 220 |
| Max. Stroke Length | 35 | 42 | 55 |
| Cycles / Min. (15mm stroke) | 31 | 24 | 29 |
| Working Height Up to Die | 970 | 840 | 1000 |
| Angle Shearing | |||
| At 90° Shearing | 80 x 80 x 8 | 100 x 100 x 10 | 100 x 100 x 13 |
| At 45° Miter Shearing | 50 x 50 x 6 | 65 x 65 x 8 | 80 x 80 x 8 |
| Working Height | 1120 | 850 | 1236 |
| Flat Shearing | |||
| Flat Bar Shearing | 350 x 8 | 300 x 12 | 350 x 15 |
| (Width x Thickness) | 180 x 12 | 200 x 18 | 210 x 20 |
| Blade Length | 360 | 310 | 360 |
| Angle Flange Trim | 75 | 100 | 100 |
| Working Height | 970 | 1150 | 1006 |
| Bar Shearing | |||
| Round Bar Shear | ø25 | ø32 | ø40 |
| Square Bar Shear | 25 x 25 | 30 x 30 | 38 x 38 |
| Channel Shear | – | 76* | 102* |
| I Beam Shear | – | 76* | 102* |
| Working Height | 1190 | 880 | 1260 |
| Notching | |||
| Rectangular Notcher (W x D x T) | 50.8 x 90 x7** | 50.8 x 90 x 7 | 50.8 x 90 x 8 |
| Vee-Notcher (Side x Side x T) | 90 x 90 x 8* | 90 x 90 x 8* | 90 x 90 x 10* |
| Working Height | – | 1150 | 1006 |